3 results
Particle drift potential of glyphosate plus 2,4-D choline pre-mixture formulation in a low-speed wind tunnel
- Bruno C. Vieira, Thomas R. Butts, Andre O. Rodrigues, Jerome J. Schleier III, Bradley K. Fritz, Greg R. Kruger
-
- Journal:
- Weed Technology / Volume 34 / Issue 4 / August 2020
- Published online by Cambridge University Press:
- 03 February 2020, pp. 520-527
-
- Article
- Export citation
-
The introduction of 2,4-D–resistant soybean and cotton provided growers a new POST active ingredient to include in weed management programs. The technology raises concerns regarding potential 2,4-D off-target movement to sensitive vegetation, and spray droplet size is the primary management factor focused on to reduce spray particle drift. The objective of this study was to investigate the droplet size distribution, droplet velocity, and particle drift potential of glyphosate plus 2,4-D choline pre-mixture (Enlist Duo®) applications with two commonly used venturi nozzles in a low-speed wind tunnel. Applications with the TDXL11004 nozzle had larger DV0.1 (291 µm), DV0.5 (544 µm), and DV0.9 (825 µm) values compared with the AIXR11004 nozzle (250, 464, and 709 µm, respectively), and slower average droplet velocity (8.1 m s−1) compared with the AIXR11004 nozzle (9.1 m s−1). Nozzle type had no influence on drift deposition (P = 0.65), drift coverage (P = 0.84), and soybean biomass reduction (P = 0.76). Although the TDXL11004 nozzle had larger spray droplet size, the slower spray droplet velocity could have influenced the nozzle particle drift potential. As a result, both TDXL11004 and AIXR11004 nozzles had similar spray drift potential. Further studies are necessary to understand the impact of droplet velocity on drift potential at field scale and test how different tank solutions, sprayer configurations, and environmental conditions could influence the droplet size and velocity dynamics and consequent drift potential in pesticide applications.
Droplet Size Impact on Efficacy of a Dicamba-plus-Glyphosate Mixture
- Thomas R. Butts, Chase A. Samples, Lucas X. Franca, Darrin M. Dodds, Daniel B. Reynolds, Jason W. Adams, Richard K. Zollinger, Kirk A. Howatt, Bradley K. Fritz, Clint W. Hoffmann, Joe D. Luck, Greg R. Kruger
-
- Journal:
- Weed Technology / Volume 33 / Issue 1 / February 2019
- Published online by Cambridge University Press:
- 14 March 2019, pp. 66-74
-
- Article
- Export citation
-
Chemical weed control remains a widely used component of integrated weed management strategies because of its cost-effectiveness and rapid removal of crop pests. Additionally, dicamba-plus-glyphosate mixtures are a commonly recommended herbicide combination to combat herbicide resistance, specifically in recently commercially released dicamba-tolerant soybean and cotton. However, increased spray drift concerns and antagonistic interactions require that the application process be optimized to maximize biological efficacy while minimizing environmental contamination potential. Field research was conducted in 2016, 2017, and 2018 across three locations (Mississippi, Nebraska, and North Dakota) for a total of six site-years. The objectives were to characterize the efficacy of a range of droplet sizes [150 µm (Fine) to 900 µm (Ultra Coarse)] using a dicamba-plus-glyphosate mixture and to create novel weed management recommendations utilizing pulse-width modulation (PWM) sprayer technology. Results across pooled site-years indicated that a droplet size of 395 µm (Coarse) maximized weed mortality from a dicamba-plus-glyphosate mixture at 94 L ha–1. However, droplet size could be increased to 620 µm (Extremely Coarse) to maintain 90% of the maximum weed mortality while further mitigating particle drift potential. Although generalized droplet size recommendations could be created across site-years, optimum droplet sizes within each site-year varied considerably and may be dependent on weed species, geographic location, weather conditions, and herbicide resistance(s) present in the field. The precise, site-specific application of a dicamba-plus-glyphosate mixture using the results of this research will allow applicators to more effectively utilize PWM sprayers, reduce particle drift potential, maintain biological efficacy, and reduce the selection pressure for the evolution of herbicide-resistant weeds.
Influence of Herbicide Active Ingredient, Nozzle Type, Orifice Size, Spray Pressure, and Carrier Volume Rate on Spray Droplet Size Characteristics
- Cody F. Creech, Ryan S. Henry, Bradley K. Fritz, Greg R. Kruger
-
- Journal:
- Weed Technology / Volume 29 / Issue 2 / June 2015
- Published online by Cambridge University Press:
- 20 January 2017, pp. 298-310
-
- Article
- Export citation
-
Recent concerns regarding herbicide spray drift, its subsequent effect on the surrounding environment, and herbicide efficacy have prompted applicators to focus on methods to reduce off-target movement of herbicides. Herbicide applications are complex processes, and as such, few studies have been conducted that consider multiple variables that affect the droplet spectrum of herbicide sprays. The objective of this study was to evaluate the effects of nozzle type, orifice size, herbicide active ingredient, pressure, and carrier volume on the droplet spectra of the herbicide spray. Droplet spectrum data were collected on 720 combinations of spray-application variables, which included six spray solutions (five herbicides and water alone), four carrier volumes, five nozzles, two orifice sizes, and three operating pressures. The laboratory study was conducted using a Sympatec laser diffraction instrument to determine the droplet spectrum characteristics of each treatment combination. When averaged over each main effect, nozzle type had the greatest effect on droplet size. Droplet size rankings for nozzles, ranked smallest to largest using volume median diameter (Dv0.5) values, were the XR, TT, AIXR, AI, and TTI nozzle with 176% change in Dv0.5 values from the XR to the TTI nozzle. On average, increasing the nozzle orifice size from a 11003 orifice to a 11005 increased the Dv0.5 values 8%. When compared with the water treatment, cloransulam (FirstRate) did not change the Dv0.5 value. Clethodim (Select Max), glyphosate (Roundup PowerMax), lactofen (Cobra), and glufosinate (Ignite) all reduced the Dv0.5 value 5, 11, 11, and 18%, respectively, when compared with water averaged over the other variables. Increasing the pressure of AIXR, TT, TTI, and XR nozzles from 138 to 276 kPa and the AI nozzle from 276 to 414 kPa decreased the Dv0.5 value 25%. Increasing the pressure from 276 to 414 kPa and from 414 to 552 kPa for the same nozzle group and AI nozzle decreased the Dv0.5 value 14%. Carrier volume had the least effect on the Dv0.5 value. Increasing the carrier volume from 47 to 187 L ha−1 increased the Dv0.5 value 5%, indicating that droplet size of the herbicides tested were not highly dependent on delivery volume. The effect on droplet size of the variables examined in this study from greatest effect to least effect were nozzle, operating pressure, herbicide, nozzle orifice size, and carrier volume.